When it comes to selecting the right nails for your projects, you first need to know a bit about each type of nail available. If you’ve not completed many different jobs for home improvement, you may be surprised with the variety and choice of nails that are available to you. Even if you might think that a nail is a nail, you will be shocked how disastrous your project becomes if you buy the wrong type. Most hardware stores sell many different types of nails, including those listed below.
You can buy studs of stainless steel, galvanized nail, as well as those that are made of brass, aluminum and copper. Nails come in different sizes and lengths. The most common type of memory nail has a flat head and works for most tasks. They are available in different lengths and is relatively inexpensive. They, however, leave behind a visible nail head. Common nails work fine for most small tasks, but they can’t hold well enough for other, larger and more structurally demanding projects.
If you need something that is a little more specialised, you might want to look for these different types of nails:
· Box nails are like common nails in that they both have large, flat heads. However, box nails have a lighter gauge than common nails. You want to have in the box of nails, if you are working with wood that may split easily. However, box nails may not hold as well as other types of nails.
· Finish nails, on the other hand, have much smaller heads. The is the nail of choice for projects that you don’t want visible nail heads. When they are hammered in, you can barely see finishing nails.
· A brad is a type of nail that is very similar to a finishing nail but with one exception: rather than flat head, brads have rounded heads that are even smaller than those on finishing nails.
· For roofing projects, you will want dedicated roofing nails which are intended to knock down the shingles. Their heads are bigger than those found on common nails, and they are specially coated to prevent oxidation. Often galvanized nail are used for this application. For most roofs, one to two inch roofing nails are used.
· Coated nails are covered with a resin that acts as a sort of glue. These nails are great if you need a little extra money in order to retain power.
· Threaded, or coil nails, are the main types of spikes available. They have as much holding power as wood screws, but they can be easily hammered into. These nails are excellent for more structurally demanding projects such as cabinets which will hold a large amount of weight.
· Finally, masonry nails are made from extra strength steel and have grooves that provide them extra holding power. However, due to these grooves, they must be driven in straight, and it generally takes a heavy duty hammer or less a sledgehammer to the device. If they are not oriented in a straight line, there is a chance the nail could bend or break.
it is very important that you use fastener for your application otherwise you risk producing substandard work or even a structurally unsafe job.
Stanley Bostitch offer a full range of screws for building and home improvement work. If you need studs of stainless steel, galvanized studs, or any other type of fastener, you will find the recommend that you are looking at bostitch.co.united kingdom.