If you’ve ever thought about getting your own solar panels to help save the environment, as well as your hard earned money, then you are in luck. Our handy guide gives you a quick overview of what is involved with installation of solar panels. First things first, equipment. You are going to need the panels themselves, mounts, rails, a conduit, tape measure, laser sight, stud finder, screws and a drill. Check your panels in case you need any additions as they can vary depending on what you get.
Before you begin the installation, you will need to perform an energy audit of your home, so you know how many solar panels on the roof of your property will have the opportunity to take and how much you are going to save money by using them. The department of Energy will be able to give you advice on how to do this. You must also make sure that the panels are in excellent position to catch the sunlight: do not install them in the shade or it will not work properly. Cut a few low branches.
the mounts are the first thing that you need to install, and they need to be placed on your house, the beams, since it will support the solar panels, when they are in place. With the help of a stud finder, locate the position of the beams. Then use a laser sight to determine the exact location of your mounts. Then, drill the holes for the mounts with a pilot bit, which should help to protect the stem. Then, attach the mounted on the roof using lag bolts.
Your next job is to use bolts and attach the rails to the mounts. Then it’s time to individually install the solar panels on the rails, carefully securing them in place before moving on to the next. The final job is to attach a conduit, running it from the converter in your house, and then connect it to solar panels. Attach it properly in order to not have to worry about it moving or being damaged in bad if. Finally, check to see your new panels to work properly.
in General, is not particularly complicated to install their own solar panels, but you must be careful and be cautious, especially when you are working on the roof. You should also pay attention to your local electricity provider before installation as they may buy some of its power outside of you, and some of them require you to have one of its technicians present. It can also be a expert to check your work before and after doing it to ensure that the panels are safe and that you comply with all the provisions.
to learn More : www.solarinstall.co.uk